Knowledge - Home

Knowledge Base


Topics
Products:
<Group 3 Label>
Language

Featured Articles

Search Results

You searched for: atlas

How to identify Atlas 10K III part numbers and labels.
Explains the two different labels used on Atlas 10K III SCSI drives.
Loud noise from the Atlas 15K and 10K IV during startup.
During startup, the Atlas 15K and 10K IV may emit a loud screeching noise. This article explains.
Windows NT 4.0 Support for Quantum Atlas-I SCSI Drives w/ Adaptec 2940/3940
Provides a link to Microsoft information about Windows NT and its support for certain legacy Maxtor drives.
Quantum® Atlas 10K SCSI drives - Fibre Channel models TN18F011, TN18F01E.
Quantum Atlas 10K hard drives with these markings carried no warranty. This article explains.
The difference between Atlas 10K III model KW36L011 and KW036L4
Explains the differences between the two models.
How can I determine the model and capacity of my Quantum® hard drive?
This article will display how to find model and serial numbers on Quantum labels.
Maxtor & Quantum SCSI Drive Jumper Settings
Jumper setting diagrams for Maxtor-brand and Quantum-brand SCSI drives.
How To Perform Diagnostics on Maxtor (or Quantum) SCSI Drives
Instructions about usage of SCSIMax.
System requirements and supported Hard Drives for the QDPS SCSI program.
Discussion surrounding the legacy QDPS program and its interaction with legacy SCSI drives.
What are Sense Keys, Sense Codes, and Additional Sense Code Qualifiers?
When an error condition is encountered on the SCSI bus, SCSI devices will issue a CHECK CONDITION Status to the host. This article explains.
What is Ultra160?
Ultra160 and Ultra3 devices are interoperable irrespective of the name used by its vendor. This article explains.
How to properly terminate a LVD SCSI hard drive
LVD SCSI hard drives do not provide on board termination, relying instead on "system-level termination". This article explains.
Termination Power with LVD SCSI and detect issues.
Atlas-IV and Atlas 10K LVD drives may experience detection problems. This article discusses troubleshooting with firmware update and termination power.
What are BTU (thermal) ratings for Quantum® SCSI hard drives?
Discusses the approximate BTU output of a Quantum hard drive.
Tagged command queuing support and Maxtor SCSI hard drives.
All Seagate, Maxtor and Quantum Atlas and Fireball drives support all three SCSI-defined queue-tag messages. This article explains.
Quantum ATA and SCSI Drive Jumper Settings
Links to the Seagate site for jumper settings for these drives.
How do I terminate my SCSI hard drive?
Explanation of proper SCSI cabling and termination.
Drive Not Detected - helpful links
Links to the various troubleshooters that attempt to resolve non-detection and other problems with Seagate, Samsung-brand, and Maxtor-brand drives.
System hangs when using SCA-2 pin converter or interface adapter.
Information in case your legacy SCSI drive is connected via an older and incompatible interface, causing the system to hang.
Loading...