使用 Seagate DiscWizard v18 將容量大於 32GB 的大容量硬碟機格式化為 FAT32 檔案系統


請遵循下列程序,使用 Seagate DiskWizard v18,將大於 32GB 的大容量硬碟機格式化為 FAT32 檔案系統:

重新格式化硬碟機時會將硬碟機上的資料全部刪除,所以在格式化之前,您應該先將硬碟機上任何需要的資料複製保存。

安裝並啟動 DiscWizard

1) 在 DiscWizard 軟體的首頁畫面,選取 Tools (工具),然後按一下 Add New Disk (新增磁碟)。
This image is not available because: You don’t have the privileges to see it, or it has been removed from the system

2) 選取正確的磁碟機並遵循精靈的提示。
This image is not available because: You don’t have the privileges to see it, or it has been removed from the system

3) 選取 MBR
This image is not available because: You don’t have the privileges to see it, or it has been removed from the system

4) 選取未配置的硬碟機,然後選取 Create new partition (新增分割區)
 
This image is not available because: You don’t have the privileges to see it, or it has been removed from the system

5) 將File system (檔案系統):變更為 FAT32
This image is not available because: You don’t have the privileges to see it, or it has been removed from the system
注意:您也可以手動選取分割區代號,並新增標籤。

6) 選取 Accept (接受)

7) 然後選取 Next (下一步)

8) 接著選取 Proceed (繼續)

格式化過程中系統匣會顯示 DiscWizard 圖式,作為格式化進度的指示。完成後,硬碟機將能從「Windows 檔案總管」開啟。 

 



請為這篇文章的實用性評分。