Seagate BlackArmor Manager: Creating a RAID 5 Volume

A volume with RAID 5 is built from a minimum of three disk drives and uses data striping and parity data to provide redundancy. (Parity is extra information that is used to re-create data if a disk drive fails. In volumes with RAID 5, parity data is striped evenly across the disk drives with the stored data.) Parity data provides data protection, and striping improves performance.
The following provides the steps necessary to create a RAID 0/1/5/10/Spanned/JBOD volume. It is assumes the following:

  • You have backed up any/all critical data off of the BlackArmor NAS Server.
  • All previous unneeded volumes have been deleted.
  • You are currently logged into the BlackArmor Manager with admin privileges.

Procedure(s):

  1. Mouseover Storage and click Volumes. The Volumes page opens.
  2. Click the Add icon. The Volume Add Disk Selection page opens. Select the drives (HDDs) you wish to include in the volume.
  3. Click Next. The Volume Add RAID Type page opens. Click on the RAID 5 radio button.
  4. Click Next. Enter the following information:
    1. Volume Name
    2. Volume Description
    3. Check whether to Encrypt the volume.
    4. Enter a Volume Size or check the Max box to use the entire space of the selected drives.
  5. Click Next. The Volume Add Summary page opens, showing you the settings for the volume.
  6. Click Finish. Volume creation starts processing. When finished, the volume prepares. This may take awhile depending on the size of the volume. When finished, the message "RAID configuration changed successfully..." disappears, the volume is ready for use.

Seagate Video Tutorial – Creating a RAID 5 Volume
View Flash Guide
Click here to watch the movie.





Please rate the helpfulness of this article