How do I find out which firmware version I have on my Seagate SCSI hard drive?

SCSI Hard Drives

  1. Download and install SeaTools Enterprise.
  2. Click START | PROGRAMS | SEATOOLS ENTERPRISE to run the program. It will SCAN any SCSI device(s) installed in the system.
  3. Select the drive you would like to update.
  4. If you double-click on the scanned model number it will provide you with your current Firmware Revision and Model Number. The Device Inquiry Box should also appear after double-clicking the scanned device.

The Drive's firmware version is very important. Applying the wrong firmware to a drive could possibly damage the drive.
You can also find the firmware revision on your drive label. You should write down the following information from the label:

Drive Model Number (example: ST3146807LC)
Drive Part Number (example: 9.xxxxxx-xxx)
Drive Firmware Rev. (example: xxxx)

For more information about firmware, please see Document ID: 207931.

Please rate the helpfulness of this article