Common Stop (Blue Screen) Error Messages in Windows

Stop messages provide diagnostic information, such as Stop codes and driver names, that you can use to resolve the problem. However, this information disappears when you restart your computer. Therefore, it is important to record the information displayed for future reference.

The following are a list of the more common stop codes and potential resolutions:

  1. Stop 0x0000000A or IRQL_NOT_LESS_OR_EQUAL
    Microsoft Support article 311564
     
  2. Stop 0x0000001E or KMODE_EXCEPTION_NOT_HANDLED
    Microsoft Support article 811014
     
  3. Stop 0x00000024 or NTFS_FILE_SYSTEM
    Microsoft Support article 228888
     
  4. Stop 0x0000002E or DATA_BUS_ERROR
    Microsoft Support article 218132
     
  5. Stop 0x0000003F or NO_MORE_SYSTEM_PTES
    Microsoft Support article 137309
     
  6. Stop 0x00000050 or PAGE_FAULT_IN_NONPAGED_AREA
    Microsoft Support article 222635
     
  7. Stop 0x00000077 or KERNEL_STACK_INPAGE_ERROR
    Microsoft Support article 228753
     
  8. Stop 0x00000079 or MISMATCHED_HAL
    Microsoft Support article 329972
     
  9. Stop 0x0000007A or KERNEL_DATA_INPAGE_ERROR
    Microsoft Support article 275149
     
  10. Stop 0x0000007B or INACCESSIBLE_BOOT_DEVICE
    Microsoft Support article 214810
     
  11. Stop 0x0000007F or UNEXPECTED_KERNEL_MODE_TRAP
    Microsoft Support article 264045
     
  12. Stop 0x0000009F or DRIVER_POWER_STATE_FAILURE
    Microsoft Support article 271838
     
  13. Stop 0xBE or ATTEMPTED_WRITE_TO_READONLY_MEMORY
    Microsoft Support article 244617
     
  14. Stop 0xC2 or BAD_POOL_CALLER
    Microsoft Support article 285069
     
  15. Stop 0x000000D8 or DRIVER_USED_EXCESSIVE_PTES
    Microsoft Support article 311551
     
  16. Stop 0x000000EA or THREAD_STUCK_IN_DEVICE_DRIVER
    Microsoft Support article 293078
     
  17. Stop 0x000000ED or UNMOUNTABLE_BOOT_VOLUME
    Microsoft Support article 297185
     
  18. Stop 0x000000F2 or HARDWARE_INTERRUPT_STORM
    Microsoft Support article 290101
     
  19. Stop 0xC000021A or STATUS_SYSTEM_PROCESS_TERMINATED
    Microsoft Support article 295087
     
  20. Stop 0xC0000221 or STATUS_IMAGE_CHECKSUM_MISMATCH
    Microsoft Support article 101096

 

REFERENCE TO THIRD PARTIES AND THIRD PARTY WEB SITES. Seagate references third parties and third party products as an informational service only, it is not an endorsement or recommendation - implied or otherwise - of any of the listed companies. Seagate makes no warranty - implied or otherwise - regarding the performance or reliability of these companies or products. Each company listed is independent from Seagate and is not under the control of Seagate; therefore, Seagate accepts no responsibility for and disclaims any liability from the actions or products of the listed companies. You should make your own independent evaluation before conducting business with any company. To obtain product specifications and warranty information, please contact the respective vendor directly. There are links in this document that will permit you to connect to third-party web sites over which Seagate has no control. These links are provided for your convenience only and your use of them is at your own risk. Seagate makes no representations whatsoever about the content of any of these web sites. Seagate does not endorse or accept any responsibility for the content, or use, of any such web sites.
 





Please rate the helpfulness of this article