This article will discuss how to change the OneTouch button on an OneTouch drive.

You can remap the Maxtor OneTouch Button to an application or file via the OneTouch Settings Program.

1. Double-click on your Macintosh Hard Drive.
    
2. Double-click on the Applications Folder.
   
3. Double-click on the OneTouch Settings program.
   
   
   
   The Maxtor OneTouch Settings window should appear.
   
   
    
4. To change the OneTouch Program Setting, click on the Select Action button. The following window will appear:
   
   
   
   Select the program that you want to associate with the OneTouch Button (e.g., in this example, the Disk Utility was chosen) and click on the Open button.
    
5. Close the OneTouch Settings program. Press the OneTouch Button and the OneTouch Button will launch the new program.