How to Recover an Image Backup in Windows with DiscWizard v18

  • An image backup created with DiscWizard v18 can only be restored to the exact same computer on which it was created.
  1. Open the DiscWizard software and click on the Backup selection.
     
  2. Select the backup you want to restore and click on Recover Disks at the bottom of the window. 
    Note: If you see Recover PC instead of Recover Disks, click on Recover PC, then click on Recover Disks at the bottom left of the window.
    User-added image
 
  1. The software will display the drives that were backed up previously.  Check the box next to the drive you want to restore.
     
  2. Change the Select Destination drop down menu to the drive to which you want to restore, then click Recover Now at the bottom right of the window.
     
  3. If the destination drive is not empty, a message displays, asking if you are sure it is OK to erase the drive. Click Yes to begin the restore process.
     
  4. A status bar will display the progress of the restore.
     
  5. A reboot may be required to complete the Image Restore.
     
  6. Once the image has been restored, verify that it was successful by booting from the Destination Disk to which it was restored.

    *For more information regarding DiscWizard, you can access the built-in help guide through the Help selection on the left side of the software..

     




Please rate the helpfulness of this article