How to Use Add New Disk/Format with DiscWizard v16 from the Bootable Media CD



First you will need to create bootable media from the DiscWizard software. For instructions on how to create bootable media please select here.

Items to Note:
  • After installing a new hard drive in your computer, you can allocate the disk space, create new partitions and specify required file system, partition type and letter.

     *When booting to the DiscWizard CD you will be prompted to boot normally into your Windows Operating System or into DiscWizard. Select DiscWizard.
  1. From the Home Screen of the DiscWizard software click Add New Disc.
    *From Boot CD* Main screen of the software with Add New Disc squared off.
     
  2. Select the disk you would like to Add/Format.
    *From Boot CD* Select the Disc you would like to Add/Format. Disc 2 is selected.
     
  3. This message will appear if the selected disk has been partitioned. Click OK to allow DiscWizard to erase the drive of all its partitions before performing the format/add.
    *From Boot CD* Pop Up warning you that Discwizard will delete all partitions off the selected disc.
     
  4. If the drive is 2TB or below in size select MBR. If the drive is over 2TB you will need to select GPT.
    Important: Windows XP systems are not compatible with GUID Partition Table (GPT).
    *From Boot CD* Selecting to Initialize the drive as MBR.
     
  5. At the bottom of the screen right click and select Create New Partition.
    *From Boot CD* Shows the Create New Partition option when you right click on the unallocated drive.There is an arrow pointing to Create New Partition
     
  6. Specify the file system (For Windows use NTFS), the drive letter, and the name of the volume, then click Accept.

    *The default setting is to partition the drive as one partition.
    *From Boot CD* Settings of the partition -File System, Partition Letter,Partition label and Accept are squared off.
     
  7. Select the disk and then click Next.
    *From Boot CD* Displays the drive with its settings that were selected on the previous screen.
     
  8. Review the summary screen and click Proceed.
    *From Boot CD* Shows the Before and After of the selected drive.
     
  9. Once the disk has been formatted, a confirmation screen will appear. Shut down the computer and remove the DiscWizard bootable CD. When the operating system boots the new disk should appear in Disk Management and be accessible in Computer.
    *From Boot CD* Pop up stating that the disk was added successfully.




Subscribe

Language


Did this article answer your question?


How could we make this article more helpful?