How to reset Seagate Wireless Plus firmware if GoFlex Satellite firmware is applied

How to reset Seagate Wireless Plus firmware if GoFlex Satellite firmware is applied



Provides instructions for loading the proper firmware onto the Wireless Plus device if the wrong firmware is applied.

If you have applied GoFlex Satellite firmware (1.3.6) onto your Seagate Wireless Plus device, please follow this procedure to reinstall the proper Seagate Wireless Plus firmware:

  1. Power down the Seagate Wireless Plus by holding down the power button for at least two seconds.
  2. Connect the Seagate Wireless Plus device to your computer via the USB cable.
    The Seagate Wireless Plus will be accessible on your computer.
  3. Drag and drop your content onto your computer to back up the data.
  4. Upload Seagate Wireless Plus firmware onto the device by following the instructions on the download page.
  5. Safely remove your Seagate Wireless Plus from your computer.
  6. Power on the Seagate Wireless Plus by holding down the power button for at least two seconds.
    The correct firmware applies. You can verify your firmware in the Settings of the Seagate Media app when connected to your Wireless Plus.

For directions on connecting to your Wireless Plus and viewing the app, please see the User Guide.





Subscribe

Language


Was this article helpful?


We appreciate any feedback.



Loading...